EG STARTS Mount Wobble — Review: Stability & Fit Issues

Data basis: This report is based on dozens of buyer reviews plus video demonstrations collected from 2023–2025, with most feedback coming from written reviews and supported by visual setup videos.

Why does the mount wobble under real flight loads?

Regret moment: You feel a wobble when you make firm yaw or pitch inputs during a dogfight or landing.

Pattern: This is a commonly reported issue and appears repeatedly across reviews, especially with larger dual-throttle or metal-base sticks.

Context: The wobble shows up on first use and worsens during long sessions or when using heavier HOTAS hardware, making fine control harder than expected for a mid-range mount.

Does it actually fit my joystick or throttle?

• Compatibility warning: Many buyers report the mount fits some sticks but not others without extra screws or adapters.
• Usage anchor: The mismatch usually appears during initial install when the factory bolt pattern doesn't line up.
• Frequency tier: This is a primary complaint and shows up across different feedback types.
• Hidden requirement: Prepare to source washers or alternate screws if your device uses nonstandard holes.
• Category contrast: This is worse than most mid-range mounts that include a broader selection of mounting hardware.

Is setup and alignment frustrating?

• Clear steps: Tightening to the chair base often requires disassembly and reattempts to eliminate play.
• Tool need: Setup commonly requires extra tools beyond basic screwdrivers.
• Time cost: Buyers report extra setup time, often doubling expected assembly minutes.
• Early signs: Gaps or slightly loose joints after first tightening are frequently mentioned.
• Worsens when: Repositioning the mount or adjusting angle increases looseness over time.
• Repair attempts: Users try extra washers, threadlocker, or reinforcement to reduce wobble.
• Category baseline: Mid-range mounts usually require less fiddling, so this feels more time-consuming than normal.

Will this mount last through regular use?

• Durability pattern: Loosening and wear are a common secondary report after weeks of regular use.
• Visible impact: Bolts backing out and slight frame bending are occasionally noted.
• Usage anchor: Problems tend to appear after repeated adjustments or daily multi-hour sessions.
• Repairability: Many buyers can temporarily fix issues but say the fixes add ongoing maintenance.
• Hidden cost: Expect to buy small hardware or reinforcement parts to maintain stability.
• Frequency tier: This is a secondary to primary issue but is persistent for heavy users.
• Category contrast: Less durable than typical mid-range mounts, where structural parts usually hold without extra reinforcement.
• Impact on use: The need for frequent re-tightening makes extended sim sessions less enjoyable.

Illustrative excerpts (not real quotes)

Illustrative: "Mount started wobbling during my second flight session, hard to aim." — Primary

Illustrative: "Bolts didn't match my throttle, had to buy washers and longer screws." — Secondary

Illustrative: "Tightened everything twice; still felt slight bend after a week." — Secondary

Illustrative: "Instructions were short; needed a larger wrench than listed." — Edge-case

Who should avoid this

• Heavy HOTAS users: Avoid if you use dual throttles or metal-base sticks since wobble risk is higher than mid-range norms.
• Minimal tinkering buyers: Avoid if you don't want to source extra screws or perform reinforcement fixes.
• Frequent long sessions: Avoid if you fly daily multi-hour sessions because loosening often appears over time.

Who this is actually good for

• Light controllers only: Good for buyers with small, lightweight joysticks who tolerate some setup time and occasional tightening.
• DIY fixers: Good for users who accept adding washers or threadlocker to boost stability.
• Budget starters: Suitable for casual pilots who want an inexpensive way to position a basic stick and don't demand pro-grade hold.

Expectation vs reality

• Expectation (reasonable): A chair mount should hold a common joystick securely during normal play.
• Reality: Many buyers see wobble or looseness under heavier inputs, which is worse than typical mid-range mounts.
• Expectation: Included hardware should fit most popular models without extra parts.
• Reality: Buyers often need extra screws or adapters, adding hidden time and cost.

Safer alternatives

• Check hardware lists: Choose mounts that list included screw sizes and adapter plates to avoid hidden compatibility issues.
• Prioritize reinforcement: Look for mounts with thicker base plates or double-bolt systems to neutralize wobble risk.
• Prefer tool-light installs: Pick products that advertise tool-free or single-wrench setup to reduce setup time.
• Read heavy-user feedback: Favor models with proven durability notes from buyers who run long sessions.
• Warranty focus: Consider sellers with clear return or replacement policies to reduce long-term regret.

The bottom line

Main regret: The most common trigger is reduced stability and hidden compatibility needs that force extra parts and effort.

Why it matters: These failures show up on first use or after repeated adjustments and are more disruptive than typical mid-range mounts.

Verdict: Avoid this mount if you need a stable, low-maintenance cockpit for heavier HOTAS gear; consider it only for light setups or when you plan to reinforce it yourself.