Product evaluated: 2 Set Desk Mount for Flight Sim Hotas Compatible with Logitech X56/X52/X52 Pro, Thrustmaster Hotas Warthog/T.16000M/T-Flight Hotas 4/X, SimTask Farmstick,Winwing Hotas, VKB, VPC Hotas (Standard)
Related Videos For You
The Ultimate HOTAS Mount 👌 Virpil Throttel and Flightstick + Elgato Stream Deck on Linear Rails
The BEST way to MOUNT your HOTAS - MONSTERTECH Table Mount REVIEW
Data: I analyzed dozens of written reviews and video demonstrations from release through Jan 2026 to create this report. Most feedback came from written reviews, with video walk-throughs supporting setup and failure examples.
| Outcome | This Mount | Typical Mid‑Range Mount |
|---|---|---|
| Stability | Higher wobble under heavy use, commonly reported during long sessions. | More stable for similar price, fewer long‑session complaints. |
| Compatibility | Patchwork fits for many HOTAS models; some buyers need extra brackets. | Better fit for major models or clearer adapter choices. |
| Assembly | Complex setup and hidden parts sometimes needed after unpacking. | Simpler assembly or clearer hardware lists in-box. |
| Regret trigger | Unexpected instability during intense flights causes immediate regret. | Minor adjustments usually fixable without extra purchases. |
| Long‑term risk | Higher wear reported after months of daily repositioning. | Lower maintenance and fewer replacements expected. |
Worried about stability?
Regret often happens when the mount shifts during intense maneuvers, making precise control impossible. This is a primary issue that appears repeatedly in buyer feedback and is worst during long sessions or aggressive inputs.
Category contrast: Mount wobble is expected sometimes, but this model shows more wobble than most mid‑range alternatives, which makes it more disruptive for flight sim precision.
Confused by compatibility?
- Pattern: Compatibility complaints are a primary issue and appear repeatedly across different HOTAS brands.
- Usage: Issues show up at first setup when buyers try to mount less-common joysticks or throttles.
- Cause: The mount requires specific bracket alignment and sometimes extra screws or spacers not included.
- Impact: Users report needing to buy adapters or improvise mounts, adding unexpected cost and time.
- Fixability: Workarounds exist but reduce convenience and void optimal ergonomics.
Concerned about assembly and hidden parts?
- Early sign: Missing fit immediately noticeable when parts don't align without extra shims.
- Frequency: This is a secondary issue seen in dozens of feedback examples.
- Cause: Instructions are minimal and assume extra tools or hardware that buyers did not receive.
- Impact: Assembly time increases and beginners often stop mid‑setup.
- Attempts: Buyers commonly improvise with home hardware or return the product.
- Hidden requirement: You often need extra fasteners or washers to secure some HOTAS models.
Worried about durability over time?
- Pattern: Wear and loosening is a persistent but less universal issue seen after repeated repositioning.
- When: Problems grow with daily handling and during months of regular gaming.
- Cause: Stress on clamp points and repeated torque cycles accelerate loosening.
- Impact: Long‑term users report re‑tightening, reduced rigidity, and occasional metal deformation.
- Attempts: Some users add thread locker or extra plates to regain rigidity.
- Category contrast: Mounts in this price tier usually need less upkeep, so this higher maintenance is notable.
- Fixability: Fixes exist but require tools and time, which hurts convenience.
Illustrative excerpts
"Shifts under heavy inputs, can't aim precisely." — Illustrative; reflects a primary pattern.
"Bracket holes didn't line up with my throttle." — Illustrative; reflects a secondary pattern.
"Needed extra screws and washers to finish setup." — Illustrative; reflects a secondary pattern.
"Clamp loosened after a month of daily use." — Illustrative; reflects an edge‑case pattern.
Who should avoid this
- Competitive pilots who need consistent rigidity, because wobble is more disruptive than expected for this category.
- Buyers without extra tools who won't tolerate hidden hardware needs or improvisation during setup.
- Users seeking plug‑and‑play mounts, since compatibility often requires adapters or modifications.
Who this is actually good for
- Hobbyists who enjoy tinkering and can accept extra assembly to adapt the mount to many HOTAS models.
- Budget builders who want a low price and can add brackets or washers to improve fit.
- Casual flyers who play short sessions and can tolerate mild wobble without precision loss.
Expectation vs reality
Expectation: A mid‑range HOTAS mount should seat gear securely out of the box. Reality: This mount often requires extra hardware or adjustments to reach that baseline.
Expectation: Assembly will take a short time for this category. Reality: Setup commonly takes longer and sometimes needs parts not included.
Safer alternatives
- Choose mounts with model lists that explicitly list compatible HOTAS models to avoid fit issues.
- Prefer bolt‑through designs or extra plate reinforcement to reduce wobble during heavy use.
- Buy from sellers including hardware or confirm a full parts list to avoid hidden fastener needs.
- Look for mounts with user guides and video setup support to reduce assembly friction.
The bottom line
Main regret is unexpected instability and hidden compatibility needs that appear at setup or during heavy use. This exceeds normal category risk because fixes often require extra hardware and time. Verdict: avoid if you need reliable, out‑of‑box performance.
This review is an independent editorial analysis based on reported user experiences and product specifications. NegReview.com does not sell products.