YESWELDER Wobbly Wheels & Weak Drawers — Issues Review

Data basis: This report is built from dozens of written reviews and several video demonstrations collected between March 2023 and January 2026. Most feedback came from written reviews, supported by video demos and Q&A notes.

Why does the cart feel wobbly when you move it with gear?

Regret moment: Wheels commonly wobble when the cart carries tanks or heavy tools, causing instability during movement.

Pattern: This problem is a primary issue and appears repeatedly across buyer feedback, especially in written posts and demonstration videos.

Usage anchor: The wobble shows up on first use and often worsens during longer moves or with uneven surfaces.

Category contrast: More disruptive than most mid-range welding carts, since buyers expect safe, steady transport with full loads.

Why do the drawers stick or misalign after setup?

• Early sign: Drawers rub or bind during the first few openings on assembly.
• Frequency tier: This is a secondary issue that appears commonly in written reviews.
• Likely cause: Slight factory misalignment or fastener tension requires field adjustment.
• Impact: Sticking drawers make access slower and increase tool fumbling during jobs.
• Fixability: Some buyers report easy fixes with loosening and re-tightening bolts, but not everyone finds it straightforward.

Will my MIG or TIG unit actually fit and be stable on the top?

• Compatibility note: The top layer limits placement width to about 10.6 inches, which conflicts with many larger units.
• Pattern: This is a secondary complaint seen across several reviews and videos showing overhang or awkward placement.
• When it shows up: Problem appears during initial setup when buyers try to place their welder on the top shelf.
• Severity: More inconvenient than usual because it forces extra bracing or off-center placement.
• Workaround: Buyers commonly add blocks or external brackets to hold larger machines, adding time and cost.
• Hidden need: The cart often requires additional accessories for secure placement of non-compact welders.
• Category contrast: Unlike many mid-range carts, this model expects a compact welder or extra rider hardware for safe fit.

Does assembly and finish create extra work or surprises?

• Initial surprise: Some buyers report missing or loose bolts during unboxing.
• Frequency tier: This is a recurring, secondary to edge-case issue across text and video feedback.
• Early fix: Assembly often needs extra tools and time to align parts properly.
• Finish concerns: Scratches and uneven paint appear in several reports, requiring touch-up.
• Durability signal: A few users noted loosened fasteners after months of movement, suggesting maintenance is needed.
• Hidden requirement: Buyers should expect to source hardware or washers to tighten the cart fully for safe transport.
• Impact: These issues increase setup time, and sometimes require trips to hardware stores.
• Category contrast: More upkeep than most mid-range carts, which usually arrive with complete hardware and cleaner finish control.

Illustrative excerpts

"Top shelf too small for my MIG unit, had to bolt it off-center." — reflects a secondary pattern about compatibility needs.

"Drawers rub until I loosen bolts and realign slides." — reflects a primary pattern about drawer misalignment.

"Wheels wobble with a full tank, feels unsafe on concrete." — reflects a primary pattern about mobility and safety.

"Missing small screws, had to buy replacements before assembly." — reflects an edge-case pattern about parts completeness.

Who should avoid this

• Mobile pros: Avoid if you frequently move loaded tanks, since wobble and instability are core complaints.
• Owners of large welders: Avoid if your unit is wider than the top placement limit, because compatibility needs add cost and time.
• Buyers needing plug-and-play: Avoid if you expect flawless assembly, since missing/loose hardware and finish fixes are commonly reported.

Who this is actually good for

• Compact-welder hobbyists: Good if you use a small MIG/TIG unit and accept occasional drawer tweaks.
• Workshop owners with tools: Good if you already have spare fasteners and basic tools to tighten and align parts.
• Stationary users: Good if the cart stays mostly in one spot and mobility issues are less important.
• Budget-focused buyers: Good if you want storage and mobility at a lower price and can invest minor repairs.

Expectation vs reality

Expectation: Reasonable for this category to provide steady movement with full tanks.

Reality: Many buyers find wobble and alignment issues that force extra bracing and adjustments.

Expectation: Reasonable to receive complete hardware and smooth drawers.

Reality: Drawers often need field alignment and some buyers buy replacement bolts or washers.

Safer alternatives

• Choose reinforced-base carts with wider wheelbases to reduce wobble during full-tank moves.
• Prioritize larger top platforms if you own a wider MIG/TIG machine to avoid off-center placement workarounds.
• Buy models with ball-bearing slides to prevent drawer binding and reduce adjustment time.
• Check seller hardware policies and prefer products that document included fasteners clearly to avoid missing parts.
• Consider pro-grade wheels or upgrade casters to improve long-term mobility on rough floors.

The bottom line

Main regret: Mobility instability and drawer misalignment are the most common triggers for buyer frustration.

Why it matters: These issues add time, safety concerns, and often require extra parts or tweaks beyond normal expectations.

Verdict: Avoid this cart if you need reliable, out-of-box stability and fit for larger welders unless you are prepared to do fixes.