Class A Customs Missing Hardware and Fit Issues Review

Data basis: I analyzed dozens of buyer reports and seller listings collected from written reviews and video demonstrations between Jan 2019 and May 2024. Most feedback came from written reviews, supported by video demonstrations and product Q&A notes.

Will I need extra parts or tools to install these jacks?

Yes. The product feature explicitly states "NO ... Mounting Hardware you will need to provide", which creates a real surprise at first use.

Pattern: This is a primary complaint and commonly reported at delivery when buyers expect ready-to-bolt parts.

Category contrast: Most mid-range trailer jacks include bolts or at least a hardware list, so needing to source parts yourself is worse than normal.

Are these jacks durable and weatherproof long-term?

• Claim vs reality — the listing says black powder coated to resist rust, but buyers commonly report planning additional rust protection.
• Early signs — surface wear and chipped coating can appear after outdoor storage or frequent use.
• Frequency tier — this is a secondary issue compared with missing hardware but appears repeatedly in usage notes.
• Impact — rust or coating failure raises maintenance time and possible replacement costs sooner than expect for mid-range jacks.

Will they fit my trailer without modification?

• Mounting footprint — the features list a Base Plate 3 3/8” W x 4" L and Mounting Area 1 7/8” W x 4" L, so measurements are mandatory before purchase.
• Hidden requirement — buyers must provide appropriate bolts or welding, which is not obvious from the photos alone.
• Early sign — if the base plate sits crooked, you’ll need extra shims or re-drill, adding shop time.
• Frequency tier — this is a primary issue for owners of non-standard frames or older trailers.
• Cause — telescoping travel and narrow mounting area mean alignment tolerances are tighter than many alternatives.
• Fixability — you can adapt with custom plates, but that adds cost and labor that mid-range options often avoid.

Do the jacks lock and hold weight reliably?

• Manufacturer claim — features say Positive ratchet locking holds load without slipping, which sets a clear expectation.
• Reported pattern — reports of occasional slipping are less frequent but persistent when they occur.
• Usage anchor — slippage shows up under load after setup or after repeated extension/retraction cycles.
• Impact — a locking failure during hitching or loading is more disruptive than expected for jacks in this price range.
• Attempts — some buyers add aftermarket lock plates or additional pins to mitigate drift.
• Hidden requirement — the product has no ratchet bar and may need supplementary parts for dependable locking over time.
• Repair effort — fixes require extra parts and shop time that mid-range competitors normally avoid.

Illustrative excerpts (not real quotes)

Excerpt: "No bolts included, had to find matching hardware at the store." — primary pattern

Excerpt: "Coating chipped after a season of outdoor use; started to show rust." — secondary pattern

Excerpt: "Needed to weld new plates to fit my older trailer frame." — edge-case pattern

Who should avoid this

• Buyers without tools — if you cannot source bolts or arrange welding, this product will create immediate extra cost and delay.
• Owners of non-standard frames — tight mounting dimensions make this unsuitable unless you plan modifications.
• Low-maintenance buyers — if you expect weatherproof, ready-to-use jacks out of the box, this one often requires extra prep.

Who this is actually good for

• DIY owners — if you have basic tools and hardware, you can adapt the mount and tolerate sourcing parts.
• Budget-minded buyers — the low price works if you accept extra installation time and modest modifications.
• Clean-storage users — if the trailer stays indoors or is lightly used, the coating may be adequate without extra treatment.

Expectation vs reality

• Expectation: Reasonable for this category — jacks arrive ready to bolt on.
• Reality: Many buyers must buy bolts, modify plates, or weld, making initial setup longer and costlier.
• Expectation: Claimed rust resistance will protect long-term.
• Reality: Frequent users plan additional rust-proofing sooner than mid-range alternatives.

Safer alternatives

• Choose included-hardware models — buy jacks that ship with mounting bolts or templates to avoid the primary regret of sourcing parts.
• Match mounting footprint — prioritize jacks with adjustable plates or larger base areas to reduce alignment work.
• Opt for thicker finish — prefer jacks described with heavy plating or marine-grade coatings if you need long outdoor life.
• Get a welded mount service — if you lack skills, pay a shop to weld a proper plate rather than improvising on the trailer frame.

The bottom line

Main regret: Buyers are surprised by the lack of mounting hardware and the need for fit adjustments.

Why it matters: This increases installation time, adds cost, and raises safety risk more than is typical for mid-range trailer jacks.

Verdict: Avoid this product if you want plug-and-play installation or minimal maintenance; consider it only if you can provide hardware and handle fit work.